Home Depot and Lowes sell PPC RG6 connectors that are designed to terminate on tri and quad coaxial cable. It would seem difficult to terminate RG6 quad with standard RG6 compression connectors without cutting away at shielding. When I terminated it, I only had regular RG6 compression connectors, so maybe that termination is finicky, resulting in intermittent function? Seems like a reach, but I can try terminating with RG6Q connector and see if that makes a difference.Īny other suggestions, things to try or check? That line was recently run with new RG6Q and continuity checks out OK using a multimeter, so I think the line itself is good. Must be a problem with the wiring to the location where my existing extender was working, but dropped out once I rebooted the router. For each of them, the G1100's LAN light and extender's coax light came on. Update: I took the existing extender and all 3 of used extenders I recently picked up, and plugged them in near the G1100 and tried connecting coax directly between the router and each of the extenders. Then I tried a hard reset, but it's been 15 min and the coax light is still not coming on. ![]() So for this existing extender, I tried rebooting, but that didn't work. Once the router rebooted, I saw that one of my 2 existing extenders no longer has coax light on (the other does). But on the second, the WPS button on the extender never turned flashing red, and since the router's WPS light stayed flashing, I pulled the plug to reboot it. On the first of these extenders, that worked OK. ![]() I tried using the WPS button to sync wireless settings. Just picked up a few more used WCB6200Q extenders. Via coax running from the splitter, I have 2 WCB6200Q extenders connected. The router connects via coax to a MOCA 2.0 splitter. I've got a G1100 router (connected to ONT via ethernet).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |